ROTTNE H11D

Rottne H11D Rottne H11D

ROTTNE H11D, in 6 and 8-wheel design, is an articulated-steered harvester for thinning and final felling. Powerful engine, hydrostatic transmission, and articulated frame joint in the center give Rottne H11D excellent off-road performance and precise tracking. The harvester cab offers superb operator comfort and excellent visibility over the work area. The leveling cab, with integrated cab suspension, Comfort Line, can be turned ± 90º, automatically following the crane's slewing; also, separate joysticks can control the cab.

Rottne H11D

Operating characteristics beyond the ordinary.

Rottne H11D harvester with articulated steering works smoothly and agreeably and is superb on steep terrain or marshy ground. The hydrostatic transmission with three gear stages works with a high tractive force and gives Rottne H11D excellent operating characteristics. Furthermore, enhanced by the machine's small turning radius and with the bogie lift on both axles.

CRANE - with unlimited opportunities.

The harvester crane RC185 is specially designed and developed for the Rottne H11 range. RC185 is a parallel crane with a robust slewing base, tilt function, and high torque. The crane arms are available in two versions depending on the size of the head. In the standard design, with a single telescopic arm, the range is full 10.3 meters; in a version with a smaller head and double telescopic arms, the reach becomes 11.3 meters.

 

Rottne H11D

CAB – ergonomic operator station with luxury comfort.

Rottne harvester cab features a modern design, where the operator sits in the center.
+ Same cab for all harvesters
+ Large windows provide excellent visibility
+ Low noise level – quieter than in a new car
+ Comfort Line
+ Programmable buttons

Large and comfortable cab.

The spacious and comfortable cab with large windows gives the operator an excellent view of the entire working area. The cab swivels +/ 90 degrees, level 15 degrees, and it automatically follows the crane from side to side, but can also be controlled manually with joysticks.

Comfort Line - the original since 2007

The unique Comfort Line cab suspension system reduces shock and impact, making driving on terrain significantly smoother. Initially, Comfort Line was introduced in 2007 – and is now a well-proven system. Since its introduction, Comfort Line had been developed with improved software, more robust design, and precision positioning.

Quieter than in a car!

Sound levels are low – in Rottne's cabs, it is quieter than in a new car. Rottne cabs easily satisfy the ergonomic guidelines that apply to forestry machines.

The same cab model for all Rottne's machines

The interior of the cab, distribution box, computer equipment, and control functions are identical, which is a significant advantage for the operators that switch between different Rottne's machine models.

Rottne H11D

SERVICE FRIENDLY - serviceability is a vital factor in development work on all Rottne machines. 

The entire rear section of the harvester, housing the engine and transmission, can be quickly opened for inspection and servicing. The hinged belly plates facilitate servicing work but also make the entire rear section very easy to keep clean.

The hydraulic system vacuum pump reduces oil spillage when replacing hoses. Electric pumps for diesel and hydraulic oil simplifies filling. The distribution box with fuses, relays, and computers is well-positioned for easy access and checking. Troubleshooting the electrical system can be performed via the machine control system’s operating screen.

 

 

 

TECHNICAL DATA

  Rottne H11D 6WD

Rottne H11D 8WD

Engine
Fuel Diesel or HVO
Fuel tank 377 liters (100 US gal)
AdBlue tank 20 liters (5 US gal)
Type JD 6068H I550 Power Tech PVS, Stage V
Output 164 kW (220 hp) at 1800 rpm
Torque 963 Nm (710 lb ft) at 1400 rpm
Cylinder volume 6,8 liters (415 in3)
Transmission
Type D5 controlled, hydrostatic/mechanical with full capacity control. 3 gear steps. Manual differential locks.
Tractive force 167 kN (37 540 lbs)
Speed, gear 1 0 - 5 km/h (0 - 3.1 mph)
Speed, gear 2 0 - 9 km/h (0 - 5.9 mph)
Speed, gear 3 0 - 25 km/h (0 - 15.5 mph)
Brakes
Type 2-circuit electrically/hydraulically operated negative wet disc brakes. Automatic load brake. Spring-assisted parking and emergency brake.
Wheel equipment
6 WD, front 710/40 x 24,5
6 WD, rear 710/55 x 34
8 WD 710/55 x 34
Chassis
Type Frame-steered
Steering angle +/- 43°
Max. steering torque 68.6 kNm (50 600 lb ft)
Horizontalangle +/- 22°
Hydraulic System
Type A load-sensing system, entirely separated from the transmission.
Pump capacity 357 liters (94 US gal) /1700 rpm
Working pressure 3.0 - 25.0 Mpa (435-3 625 psi)
Degree of filtration 10 micron
Tank volume 150 liters (40 US gal)
Electrical System
Type 24-volt electrical system with CAN-bus technology.
Battery 2 x 120 Ah
Alternator 150 A
Machine control system ROTTNE D5
Bucking system ROTTNE Forester
Display 15
Working lights 18 pcs
Cab
Type Spacious, vibration-proof safety cab. ISO certified
Noise level 63 dBA
Swivels +/- 90°
Tiltable 15°, 14°, +/-11° (front, back, side)
Climate system ACC
Crane
Type Parallel jib arm crane, RC185, with tiltable swing base and telescope. (optional - with a double telescope.)
Tilt angle forwards 25°
Tilt angle backwards 19°
Lifting torque 193 kNm (142 300 lb ft)
Angle of rotation 260°
Reach 10.3 m alt 11.3 m (34 ft / 37 ft)
Torque 50.8 kNm (37 470 lb ft)
Weight and dimensions
Service weight from 17 400 kg (38 400 lbs) (6WD) / 18 900 kg (41 670 lbs) (8WD)
Width 2 830 mm (111 in)
Length 7 940 mm (313 in)
Transportation height 3 590 mm (141.5 in)
Ground clearance (at articulated frame lock) 600 mm (24 in)
Equipment
Chains Yes
Lighting Xenon or LED Yes
Sprinklers Yes
Engine/cab heater Yes
Blinds Yes
Mobile telephone Yes
Vacuum pump Yes
Reversing camera Yes
Colour marking Yes
GPS/Geoinfo (Gis) Yes
Filler pump Yes
Green oil Yes
Computer caliper Yes
Colour printer Yes
Mobile broadband Yes
Orbital steering Yes
Full toolkit Yes
Central lubrication Yes
Equipment for stump spray application Yes
Tracks Yes
Multi-tree equipment Yes
Cab damping Yes
Double telescope Yes
Balanced bogie system Yes
Bogie lift Yes
Air compressor Yes
 

HARVESTER HEADS

EGS596

Rottne EGS 596 Rottne EGS 596

EGS 596 - harvester head designed for Rottne H11, H14, or H21. The harvester head has three feed rollers, two located in supporting wheel arms that push the stem in towards the third feed roller. The tree's stem is held in a steady grip, supported by the rollers instead of limbing knives. Therefore, the knife pressure is lowered, which reduces the friction and consequently ensures better utilization of the feed force.

The upper and lower limbing knives, as well as wheel arms, can be operated, either jointly or individually.

The diameter measurement is performed via sensors in the lower knives and length measurement by a separate free-running measuring wheel.

 

 

 

 

Feed rollers ROTTNE / Moipu
Feed rate 0 - 5.1 m/s (17 ft/sec)
Power supply 25 kN (5 620 lbf)
Wheel opening 640 mm (25 in)
Pruning diameter 50 - 413 mm (2 - 17 in)
Chains 750 / 820 mm (29.5 / 32 in)
Cutting diameter 630 / 720 mm (25 / 28 in)
Chain speed 40 - 45 m/s (130 - 148 ft/sec)
Tilt angle 136°
Width wheels closed 1 400 mm (55 in)
Width wheels opened 1 550 mm (61 in)
Height 1 516 mm (60 in)
Weight 1 155 kg (2 550 lbs)
Maximum tree size dbh* 50 cm (20 in)

LOGMAX 4000T

Logmax 4000t rottne

The LOGMAX 4000T hydraulics layout significantly improves power and feeding speed, making this 833 kg* harvesting head the ultimate choice for thinning and lighter final cuts.

This thinning head comes equipped with the first-generation Log Max 218 and 318 True-Cut saw units with up to 58 cm of cut capacity.

All these features, combined with Log Max patented knife control system, which minimizes the feed friction, provides outstanding stem coverage, and increased log quality.

Feed rollers V-Steel
Feed rate 0 - 5 m/s
Power supply 20.3 kN
Wheel opening 460 mm
Opening, upper knives 517 mm
Pruning diameter 30 - 375 mm
Chains 670 mm
Cutting diameter 580 mm
Chain speed 40 m/s
Tilt angle 128°
Width wheels closed 1 035 mm
Width wheels opened 1 426 mm
Height 1 426 mm
Weight 780 kg

 

LOGMAX 5000D

Logmax 5000D rottne

LOGMAX 5000D - a functional low weight harvester head, which provides excellent properties for thinning and medium final cut. The harvester head has a robust frame with internal components and well-embedded hoses, protected against external damage. The design of the delimbing knives provides good wrap, whereas the patented knife control reduces friction, as the stem never is pressed up against the frame.

LOGMAX 5000D has a high feed force, but as an option, there are larger wheel motors that increase the feed force to 25 kN yet reduce the feed speed a little.

Equipment for multi-tree handling, color marking, and stump treatment is available as an option.

Feed rollers V-Steel
Feed rate 0 - 4,1 m/s (0-13,5 ft/s)
Power supply 21 kN (4720 lbf)
Wheel opening 519 mm (21 in)
Opening, upper knives 573 mm (23 in)
Pruning diameter 30 - 415 mm (1-16 in)
Chains 640 / 750 mm (25 / 30 in)
Cutting diameter 570 / 630 mm (22 / 25 in)
Chain speed 45 m/s (148 ft/s)
Tilt angle 128°
Width wheels closed 1 059 mm (42 in)
Width wheels opened 1 371 mm (54 in)
Height 1 483 mm (58 in)
Weight 895 kg (1975 lbs)

 

SP461 LF

SP461 LF rottneSP461 LF rottne

SP461 LF - quick and versatile harvester head, designed for minimal friction and maximum production. Its low weight in combination with compact dimensions, ensure smooth and easy positioning, regardless of the space, and makes it an ideal harvester head for thinning.

The harvester head reaches its top capacity in stands with a b.h.d. of 10-25 cm; also handles coarser stems efficiently.

Feed rollers Finnskogsvalsar / Moipu
Feed rate 0 - 6 m/s (0 - 19.5 ft/sec)
Power supply 20 kN (4 500 lbf)
Wheel opening 420 mm (17 in)
Pruning diameter 30 - 350 mm (1 - 14 in)
Chains 590 mm (23 in)
Cutting diameter 530 mm (21 in)
Chain speed 40 - 45 m/s (130 - 148 ft/sec)
Tilt angle 135°
Width wheels closed 850 mm (33 in)
Width wheels opened 1 130 mm (45 in)
Height 1 230 mm (48 in)
Weight 680 kg (1500 lbs)
Maximum tree size dbh* 35 cm (14 in)

 

SP561 LF

SP561 LF rottneSP561 LF rottne

SP561 LF - a highly productive harvester head, designed for minimal friction and maximum production. Designed for varying tasks and offering excellent characteristics for both light thinning, as well as lighter final felling.

Compact dimensions combined with perfect limbing, down to 30 mm, meaning that light thinning is performed quickly and efficiently, with the highest quality.

For heavy felling, the smart LogHold and proportionally angled feed rollers create a harvester head with impressive stem holding and maximum production. SP561 LF is compact, broad, and versatile.

The harvester head reaches its top capacity in stands with a b.h.d. of 15 to 35 cm; also efficiently handles coarser stems.

Feed rollers Finnskogsvalsar / Moipu
Feed rate 0 - 6 m/s (0 - 19.5 ft/sec)
Power supply 25 kN (5 620 lbf)
Wheel opening 500 mm (20 in)
Pruning diameter 30 - 430 mm (1 - 17 in)
Chains 750 mm (29.5 in)
Cutting diameter 600 mm (24 in)
Chain speed 40 - 45 m/s (130 - 148 ft/sec)
Tilt angle 136°
Width wheels closed 900 mm (35 in)
Width wheels opened 1 500 mm (59 in)
Height 1 500 mm (59 in)
Weight 980 kg (2160 lbs)
Maximum tree size dbh* 43 cm (17 in)


 ROTTNE medkirtės