Belts TIMBEROLL

CONTACTS:
Vilniaus g. 4a, Grigiškės, LT-27101 Vilniaus m. sav., Lietuva

Tel. +370 5 2432146 Fax. +370 5 2432156 Mob. +370 682 31060
e-mail:
dominga@dominga.lt

BELT ts

BELT ts foto 1 BELT ts foto BELT ts foto 4
BELT ts foto 5 BELT ts foto 7 BELT ts foto 8

Timberoll

Truly endless belts with high flexibility, exceptional running linearity, maximum flatness and thickness uniformity, used in the woodworking industry on wide and narrow belt sanding-calibrating machines, edge sanding machines, planning and brushing machines. Belts are available in a wide range of structures, rubber types/hardness and top side patterns to cover all the sizes and applications range.

TRULY ENDLESS BELT FOR WOODWORKING MACHINERY
The conveyor belt of machines used for sanding calibrating and dressing of heartwood, hardboard panels, plywood, veneer, laminated plastic (synthetic resin bonded laminate) etc. must have proper characteristics to contribute to the achievement of perfectly machined surfaces.

1. Absolute uniform thickness and strength in all parts of the belt, since the carcass has to be approached over a 360° arc
2.
Exceptional belt running linearity even when the length/width ratio of the machine table is ≤ 1
3.
Improved flexibility so that pulleys with a smaller diameter can be used
4.
Maximum flatness and undeformability under working stresses
5.
Excellent smoothness on the sliding surface of the machine table due to very low sliding friction coefficients
6. Efficient grip action of the materials conveyed on the belt, since the high rubber covers and adopted profiles provide for high sliding friction coefficients.

BELT ts foto 2  1. - Structure
       This term defines the composition of the tension member or carcass and of the inner sliding ply;
  2. - Rubber cover
        This term indicates the rubber compound used for the carrying surface;
  3. - Top profile
        This is the impressed pattern which results in alternating land and voids on the rubber cover;

 

BELT ts foto 3 l = length
L = width
X = height (after grinding)
i = gap
p = pitch

 

 


standart top profile

HOMAG BURKLE GRECON MUHLBOCK DISA DANTHERM NORDFAB VECOPLAN HEESEMAN WEINIG DANFOSS YASKAWA PEZZOLATO BONGIOANI LIGNOMAT BES BOLMANN SCHWABEDISSEN BOERE BONGIOANI davikliai SICK WENGLOR OMRON parts