EWM-MS-AA card is suitable for easy synchronization of two actuators' (up to 6 axes in master-slave mode), with an overriding synchronization controller.

The card can drive only one axis (one card per axis is needed.) Proportional valves, with integrated electronics, can be driven by the differential output. A version with an amplifier is also available.

Analog (position input and) feedback sensors are scalable via software. The axes' speed can be limited by an external analog speed input.
The card has two (SDD and NC) control modes, it is set up via software only, through a USB-B port.

EWM-SS-DAD card for positioning control of the axes via CanBus connection, within a synchronization system (master/slave type) that communicates with PLC via a Profibus interface (not supplied).

EWM-SS-DAD card drives an axis, provided with an SSI position sensor (high precision), or an analog sensor. Each axis (to be synchronized within the system) requires one card.

The synchronization controller adapts the speed of the slave axis. Positioning errors, during movement, increase or reduce the slave axis velocity, to compensate for the synchronization error.

The CAN address is selectable, directly, by the rotary switch on the card front. The card setup occurs via software only, through the EWMPC software.