KESLA 14RH is a new head for first thinnings. Lightweight and excellent hydraulics efficiency make it a perfect powerpack for farm tractors, light thinning harvesters, and max. 6 tons of excavators.
The 14RH is an agile head with three delimbing knives. The single rear-knife ensures delimbing of bottom branches and holds even larger trees firmly in the grip. Due to the short frame design, processing of even crooked trees is easy. The optimal diameter of trees is up to 25 cm. The KESLA 14RH is equipable with KESLA proLOG or xLogger control and measuring system, including professional features for head control and cutting/bucking, and data transfer.
|
 |
The 16RH is a real powerhouse for thinning, suited to 6-10 tons wheeled harvesters and tractors.
KESLA 16RH is the market’s lightest professional harvester head equipped with four delimbing knives and multi-stem functions, designed for integrated harvesting of timber and biomass. Professional multi-stem features and the unique proAX-cutting systems are unequaled features in this size- and weight class.
|
 |
The new KESLA 18RH-II is suitable for machines weighing 7 to 13 tons and large agricultural tractors/excavators of 7-10 tons.
With the new frame, delimbing knife, shaft, and bearing solutions of the KESLA 18RH II, efforts have been made for even better durability and a lesser need for service, even in the most demanding operating conditions. The new, more spacious system enables a higher feed force and speed with significantly reduced fuel consumption. Feed supplemented with hydraulic traction control.
|
 |
If head weight is a critical factor, the 19RH-III is a superb choice because of its lighter weight. It is best suited for installation on 8-13 ton excavators or wheeled harvesters.
Due to its modular design, the new KESLA 19RH-III harvester head, optimized to work in a wide variety of conditions, with different wood and base machines. The KESLA 19RH-III is a 3-knife harvester head with one rear delimbing knife, suitable for first or subsequent thinning, for harvesting short rotation eucalyptus and acacia plantations with or without debarking. As a 3-knife, 19RH-III is an excellent choice for handling a slightly more challenging acacia.
|
 |
The KESLA 20RH-II models suit 8-13 ton wheeled harvesters and excavators.
The KESLA 20RH-II heads are fast and agile, suitable for thinning and final felling where the trees’ average diameter is less than 30 cm. The head’s maximum opening is 45 cm. This lightweight yet sturdily constructed harvester head provide exceptionally powerful feeding and sawing forces. Due to the four delimbing knives and picking properties, delimbing quality is excellent.
|
 |
The new KESLA 21RH-III harvester head, optimized to work in a wide variety of conditions, with different wood and base machines. It is best suited for installation on 10-13 ton excavators or wheeled harvesters.
The KESLA 21RH-III is a 4-knife harvester head with two rear delimbing knives, suitable for first or subsequent thinning, harvesting short rotation eucalyptus and acacia plantations with or without debarking.
|
 |
Brand new KESLA 24RH-III harvester head, suitable for 12-16 ton excavators and mid-size wheeled harvesters.
KESLA 24RH-III features a wide range of use from thinning up to final felling. It also can be mounted on a range of different base machines.
The 24RH-III is a compact 3-knifed head with a single rear delimbing knife. It is lighter than its 4-knifed sister 26RH-III and perfectly fits where weight is a critical factor. Thanks to the modular construction, the change between the 3- and 4-knifed versions are possible even as retro-fit.
|
 |
KESLA 25RH-II and 25RHS-II are best suited to 12-20 tonne base machines, designed especially for use with excavators.
The KESLA 25RH-II models are truly versatile harvester heads for thinning and final felling where the trees’ average diameters are less than 40 cm. The head’s maximum opening is 58 cm. Additional accessories include the proCON, hydCON, Eucapro features, color marking device, automatic chain tightener, and stump treatment device. The 25RH-II models are suitable for producing biomass harvesting with the unique KESLA proAX-cutting system and multi-stem functions.
|
 |
Brand new KESLA 26RH-III harvester head, suitable for 12-16 ton excavators and mid-size wheeled harvesters.
KESLA 26RH-III is a real multitool, working productively in all kinds of cuttings from first thinning up to final felling.
The four delimbing knives, Kesla’s unique progressive feed roller geometry, take a firm grip even of large trees, while the large feeding rollers provide excellent traction. The 2WD with unbeatable efficiency gives lots of feeding power and high feeding speed, maintaining low fuel consumption.
|
 |
KESLA 27RH-II is an all-new head for final felling, featuring powerful hydraulics combined with totally new modular frame construction, ensuring the market’s best power-to-weight ratio. It is suitable for heavy rubber-wheeled harvesters and 16-22 tonne excavators.
KESLA’s unique feed roller geometry with variable roller angle gives excellent traction and minimized friction when delimbing. The powerful hydraulics enables even 36kNm delimbing force at high feeding speed, all with less fuel consumption. A short frame with a single rear delimbing knife makes the head powerful also when processing crooked trees. That’s why KESLA 27RH-II is an excellent choice for debarking eucalyptus or acacia.
|
 |
KESLA 28RH-II is a new head for final felling, featuring powerful hydraulics combined with totally new modular frame construction, ensuring an excellent power-to-weight ratio. It is suitable for to heaviest rubber-wheeled harvesters and 18-25 tonne excavators.
KESLA’s unique feed roller geometry with variable roller angle gives excellent traction and minimized friction when delimbing; powerful hydraulics enable 36kNm delimbing force at high feeding speed, with less fuel consumption. KESLA 28RH-II is available as 2WD and 3WD version featuring a bottom roller with two motors. It’s a perfect choice for both soft and hardwood logging as well as debarking eucalyptus or acacia.
|
 |
KESLA 29RH-II is suitable for the heaviest wheeled harvesters and 20 to 30-ton track-equipped excavators.
KESLA 29RH-II is a 3-knife 2WD harvester head. The construction made to last in the most demanding working conditions.
Due to its compact design, large-diameter feed rollers, excellent protection, and robust construction, the harvester head is ideal for felling crooked and branched hardwoods. 29RH-II is also available with an integrated top saw (29RH-II TS).
|
 |
KESLA 30RH-II is a new head for heavy-duty final felling. It is suitable for track-based harvesters and 20-30 tonne excavators.
The head features powerful hydraulics combined with sturdy and modular frame construction, ensuring an excellent power-to-weight ratio and a long operating lifetime. Kesla’s unique feed roller geometry with variable roller angle gives excellent traction and minimized friction when delimbing; powerful hydraulics enables 32kNm delimbing force at high feeding speed, all with less fuel consumption. KESLA 30RH-II is available as 2WD and a 3WD version featuring a bottom roller with two motors. It’s a perfect choice for both soft and hardwood logging as well as debarking eucalyptus or acacia.
|
 |
