GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12

GDIM and GDI seals have a rubber profile in NBR 90 Shore A and are suitable for pneumatic cylinders. The higher and stronger outer lip serves as a stop against the axial seal displacement in the groove.

Features:
Speed m/s 0,25
Material Nbr/Viton
Temperature ° C -30 +110 (Nbr) -20 +200 (Viton)
Pressure Mpa 12