Features:
Speed m/s 1
Material Nbr/Metal/Viton
Temperature °C -30 +100 (Nbr/Metal) -20 +200 (Viton)

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

O-ring, designed for compression between two parts, for secure sealing, applicable as a static or dynamic seal, but in the second case must work together to adequately lubricated surfaces.

Features:
Speed m/s 0,5 (dynamic) 2 (static)
Material Nbr
Temperature °C -30 +100

Good chemical resistance to mineral oils and greases, synthetic oils and grease, engine, transmission, and ATF oils to approx. +150°C, fuels, non-flammable hydraulic pressure fluids HFD, aliphatic, aromatic, chlorinated hydrocarbons, water to the max. +80°C, excellent resistance to weathering, ozone, aging, very low gas permeability (and therefore superb for vacuum application), and resistance to a wide range of chemicals.

Features:
Speed m/s 0,5 (dynamic) 2 (rotating)
Material Viton/FFKM
Temperature °C -15 +200 (Viton) -25 +270 (FFKM)

Good chemical resistance to mineral oils and greases, synthetic oils and grease, engine, transmission, and ATF oils to approx. +150°C, fuels, non-flammable hydraulic pressure fluids HFD, aliphatic, aromatic, chlorinated hydrocarbons, water to the max. +80°C, excellent resistance to weathering, ozone, aging, very low gas permeability (and therefore superb for vacuum application), and resistance to a wide range of chemicals.

Features:
Speed m/s 0,5 (dynamic) 2 (rotating)
Material Viton/FFKM
Temperature °C -15 +200 (Viton) -25 +270 (FFKM)

Features:
Speed m/s 0,5 (dynamic) 2 (rotating)
Material Silicone
Temperature °C -60 +200

Features:
Speed m/s 0,5 (dinam.) 2 (rotac.)
Material Nbr/Pu/Viton
Temperature °C -30 +100 (Nbr) -35 +100 (Pu) -15 +200 (Viton)

BS washer consists of a square section metal ring inside which an elastomer ring with a trapezoidal vulcanized section. Bonded Seals can be disassembled and reused. This version is not self-centering. The seal is ensured by compression, with consequent deformation of the elastomer towards the sealing surface.

Features:
Material Nbr/Inox/Nbr/Epdm/SS316/Silicone/Viton/Perox
Temperature °C -50 +150 (Epdm/Perox) -40 +100 (Nbr/Inox/Nbr/Epdm/SS316) -60 +200 (Silicone/SS316) -18 +200 (Viton/Inox)
Pressure Mpa 70

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

mob. tel.: +370 612 09298  tel.: +370 682 65073  irmantas.kabosis@dominga.lt

TPM is a double-acting seal that ensures excellent resistance under medium pressure. Composed of 5 elements: a central part in NBR, two support rings in thermoplastic material, and two acetalic guide rings, also available in two versions (TPM and TPM/E), differing only in the main profile's sealing element in NBR. The unique combination of the material guarantees low friction where high pressure occurs. The seal is available in a special material, suitable for high temperatures.

Features:
Speed m/s 0,5
Material Nbr/Pom/Tpe/Viton/Bronze/Brit
Temperature °C -30 +110 (Nbr/Pom/Tpe) -20 +200 (Viton/Bronze/Tpe/Pom) -50 +100 (Brit/Pom/Tpe)
Pressure Mpa 35