Показывать только доступные товары
Показывать только товары со скидками
Показывать цены с НДС
Electrovalves

Direct-acting directional control valve CETOP R02, with ISO 4401-02 (CETOP RP 121H) standard mounting interface.

Compact design with reduced solenoid dimensions, suitable for mini-power packs and mobile and agricultural applications.

The valve's body is made of high strength iron casting, provided with wide internal passages to minimize the flow pressure drop, and wet armature solenoids with interchangeable coils.

The valve is supplied in a 4-way design, with 2 or 3 positions, and with several interchangeable spools with different porting arrangements. 

The valve is available with DC or rectified current solenoids.

Tech. specs: pmax 250 bar - Qmax 20 l/min

Подробнее...

Direct-acting directional control hydraulic valve CETOP 03, with ISO 4401 (CETOP RP121H) standard mounting surface.

The valve is supplied in 3 or 4-way design, with 2 or 3 positions, and a wide range of interchangeable spools.

The valve's body is made of high strength iron casting, provided with wide internal passages to minimize the flow pressure drop, and wet armature solenoids with interchangeable coils.

The valve is available with DC or AC solenoids. DC solenoids can be fed with AC power supply, by using connectors with a built-in rectifier bridge. The DC valve is also available in a soft-shifting version.

An alternative to the standard manual override can be a lever, push, boot, and mechanical detent devices.

Подробнее...

Direct-acting directional control hydraulic valve CETOP 03, with mounting surface according to ISO 4401-03 (CETOP RP 121H) standards.

Suitable for the mobile sector (agricultural machines), it has four different surface treatments available: standard phosphating, carbonitriding with oxidation process, semi-gloss epoxy painting, gloss polyurethane. The valve is available with DC or AC solenoids, and with several types of electrical connections (DIN 43650, AMP JUNIOR, with outgoing cables, DEUTSCH DT04-2P, AMP SUPER SEAL, DUAL DIN 43650), to cover various installation requirements.

Compact design with reduced solenoid dimensions, make the valve suitable for mini-power packs, mobile and agricultural applications.

The valve's body is made of high strength iron castings, provided with wide internal passages to minimize the flow pressure drop, and wet armature solenoids with interchangeable coils.

The valve is supplied with 3 or 4-way designs, several interchangeable spools with different porting arrangements.

The valve is available with DC or AC solenoids, and several types of electrical connections to cover various installation requirements.

The DC valve comes with boot protected manual override, which ensures a protection degree IP69K with connections type K7 and K8.

Tech. specs: pmax 280 bar - Qmax 50 l/min

 
Подробнее...

8-watt direct-acting directional control valve, CETOP 03, with mounting surface according to ISO 4401-03 (CETOP RP 121H) standards.

Compact design with reduced solenoid dimensions, suitable for mini-power packs and mobile and agricultural applications.

The valve body is made with high strength iron castings provided with wide internal passages to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 4-way designs and with several interchangeable spools with different porting arrangements.

The valve is available with DC solenoids with a 24 V power supply.

Подробнее...

Direct-acting, subplate mounting directional control valve, with mounting surface according to NFPA D03 standard.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with easily removable interchangeable coils are used.

It is supplied with a junction box for the electrical connection.

The valve is supplied with 3 or 4-way designs and with several interchangeable spools with different porting arrangements.

The valve is available with AC solenoids.

Подробнее...

MDS3 valve is used to switch multiple flow directions or to select pressure values.

The oil passage holes pass right through the entire valve body, and due to this particular design feature, the MDS3 can be assembled with all ISO 4401-03 (CETOP 03) modular valves.

The special connection of the valve in parallel to the P - T - A - B lines of the circuit allows easy construction of differents hydraulic configurations, reducing pressure drops to a minimum.

The soft-shift feature is available for some DC versions.

Подробнее...

Shut-off solenoid valve, direct-acting, available in two versions at rest: with lines blocked and with unloading lines.

It is normally used with directional control servovalves to guarantee the circuit’s safety in case of a power failure.

Wet armature solenoids with interchangeable coils are used. 

Подробнее...

Direct-acting, subplate mounting directional control hydraulic valve, CETOP 05, with mounting surface according to ISO 4401 (CETOP RP121H).

The valve is supplied with 3 or 4-way designs and with several interchangeable spools with different porting arrangements.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is available with DC or AC solenoids. DC solenoids can also be fed with AC power supply, by using connectors with a built-in rectifier bridge.

The DC solenoids DS5 directional valve is available in the following special versions:

- version with Y external subplate drain port
- version with soft-shifting
- version with an adjustable “soft-shift” device.

 
Подробнее...

Direct-acting subplate mounting directional control valve with mounting surface according to NFPA D05 standard.

The valve's body is made of high strength iron castings provided with wide internal passages to minimize the flow pressure drop. It is supplied with a junction box for the electrical connection, and wet armature solenoids with easily removable, interchangeable coils.

The valve has a 3 or 4-way design, and with several interchangeable spools with different porting arrangements.

The valve is available with AC solenoids.

 
 
Подробнее...

Direct-acting, subplate mounting directional control hydraulic valve, CETOP 05, with mounting surface according to ISO 4401 (CETOP RP 121H) standards.

Suitable for the mobile sector (agricultural machines), it has four different surface treatments available: standard phosphating, carbonitriding with oxidation process, semi-gloss epoxy painting, gloss polyurethane. The valve is available with several types of electrical connections (DIN 43650, AMP JUNIOR, with outgoing cables, DEUTSCH DT04-2P, AMP SUPER SEAL, DUAL DIN 43650), to cover various installation requirements.

The valve is suitable for special applications, guaranteed by the reduced solenoid dimensions.

The valve body is made with high strength iron castings provided with wide internal passages in order to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 3 or 4-way designs and with several interchangeable spools with different porting arrangements.

The valve is available with DC or AC current solenoids.

 

Tech. specs: pmax 320 bar - Qmax 125 l/min

 
 
Подробнее...

Direct-acting subplate mounting directional control hydraulic valve. CETOP 05 with mounting surface according to ISO 4401 (CETOP RP 121H) standards. 

The valve is suitable for special applications, guaranteed by the reduced solenoid dimensions.

The valve's body is made of high strength iron castings provided with wide internal passages to minimize the flow pressure drop. Wet armature solenoids with interchangeable coils are used.

The valve is supplied with 3 or 4-way designs and with several interchangeable spools with different porting arrangements. 

The valve is available with DC solenoids only.

 

Tech. Specs: pmax 320 bar - Qmax 125 l/min

 
 
Подробнее...

MDS5 used to switch multiple flow directions or to select pressure values.

The oil passage holes pass right through the entire valve body, and due to this particular design feature, the MDS5 can be assembled with all ISO 4401-05 (CETOP 05) modular valves.

The special connection of this hydraulic valve in parallel to the P, T, A, and B lines of the circuit allows easy construction of different hydraulic configurations, reducing pressure drops to a minimum.

 
 
Подробнее...